S.F. AGITATOR SAND MILLS: Are Designed For The Processing Of High Viscosity Offset Inks. The Mill Continuously Processes The Pre-Dispersed Printing Inks In Conjunction With An Intermediate Storage Tank. The Application Specific Design Has Been Optimized For Processing Chocolate, Paints, Liquid Printing Inks, And Pigments.

ENGINEERING AND OPERATING PRINCIPLES: Continuously Processes The Pre-Dispersed Printing Ink In Conjunction With An Intermediate Storage Tank, Pre-selected Parameters Are Held Constant During The Entire Operational Period Guaranteeing That The Best Possible Throughput Rate Is Set.

S.F SAND MILL model----- having the total volume of grinding cylinder Liters, with having the continuous output of --- to ---- Liters Per/Min. This machine is suitable for grinding low medium high viscosity material between 100 CPS and 4000 CPS thixotropics and product with highly pigmented systems. This machine will have the following items.

• Sturdy Mild Steel Fabricated Body For The Mill.
• Stainless Steel 304 Grinding Cylinder With Mild Steel Water Cooling Jacket for Cooling To The Entire Chamber; Greater Temperature Control Due To Increased Surface Area; And Reduced Pressure Drop By The Use Of Two Inlet And Discharge Ports.
• Main Shaft Will Be Stainless Steel 304 With S.S.304 Sleeves.
• Range Of Grinding Disc Available Will Be Of Special Wear-Resistant Steel, Hardened Chrome Steel Discs, Stainless Steel (304 Or 316), Hastelloy C , Polyurethane , UHMW Polyethylene , Polyamide (Nylon®) ,Aluminum Oxide, Zirconium Oxide , Silicon Nitride .
• The disc milling systems are primarily used for processing low to medium viscosity (1 to 200 poise) formulations. Solids levels in paint applications have been as high as 85% for industrial and furniture paints and ceramic slurries or slips. These systems are available in both horizontal and vertical configurations
• Heavy Duty Bearings For Main Counter Shaft.
• The Above Drive Is Provided With Imported Self Aligned Bearings To Withstand High Speed And Initial Torque Of The Mill.
• Main Drive Motor Will Be --- HP TEFC/FLP 1440 RPM, 3ph, 440 V, Motor.
• Fully Automatic Star Delta Starter For Main And D.O.L. For Feeding Pump.

Hence Complete With Material As Per Our Standard Design.